You are here:   Products
  |  Login

Categories

Minimize

All Products

Enquiry List

Minimize

Your Enquiry List is empty

Products

Minimize
Selection of interface cables
CBL121 Biodex to MP160/MP150 cable
CBL122 Unisolated  RJ11 to 3.5 mm Jack

BIOPAC BIOPAC Interface Cables

CBL100 Series analog connection cables connect stand-alone equipment to an MP System. Analog outputs from chart recorders, preamplifiers, oscilloscopes, force plates, chromatographs, etc. can be connected to the HLT100C, UIM100C, or other MP System modules. It’s also possible to use these cables to connect amplifier outputs or D/A outputs to external equipment inputs.
Code
CBLxxx

BIOPAC BIOPAC Interface Cables

CBL100 Series analog connection cables connect stand-alone equipment to an MP System. Analog outputs from chart recorders, preamplifiers, oscilloscopes, force plates, chromatographs, etc. can be connected to the HLT100C, UIM100C, or other MP System modules. It’s also possible to use these cables to connect amplifier outputs or D/A outputs to external equipment inputs.

When signal isolation is required, use the INISO or OUTISO adapter with the cable. The other end of the isolation adapter connects to the appropriate MP unit channel via the HLT100C module. Select the cable number with the plug corresponding to your equipment’s output or input jack. Use one cable per recording channel.

Select the cable option with the plug corresponding to the output jack of the equipment. Use one cable per recording channel.

 

CBL100 2 meter; 3.5 mm mono phone plug to 3.5 mm mono phone plug
CBL101
2 meter; 3.5 mm mono phone plug to male RCA
CBL102
2 meter; 3.5 mm mono phone plug to male BNC
CBL105
2 meter; 3.5 mm mono phone plug to 6.35 mm (¼”) mono phone plug
CBL106
10 cm; 2 mm pin plugs to female BNC The CBL106 is a multi-purpose adapter that can be used to:
Connect BNC terminated equipment to the DA100C
Connect a BNC cable to the digital I/O lines on the UIM100C
Connect the STM100C to nerve conduction chambers (via the CBL102) 
CBL107
10 meter, 3.5 mm mono plug to 3.5 mm mono phone plug
CBL108
60 meter, 3.5 mm mono plug to 3.5 mm mono phone plug
CBL110A
DB37 F/F Ribbon Cable. Use this 3-meter ribbon cable to interface a SuperLab presentation system with the STP100C Isolated Digital Interface for an MP1xx System. Pins 19 and 21 are GND; pin 20 is +5 V.
CBL110C
DB25 M/F Ribbon Cable. Use this 3-meter ribbon cable to send digital I/O info to the STP100C Isolated Digital Interface to interface visual presentation systems that use a computer's parallel Inquisit, etc.) with an MP1xx System. Pins 18 and 25 are GND.printer port (E-Prime, DirectRT, MediaLab,
CBL110C-Y
This Y-adapter for the CBL110C parallel port cable allows users to interface the output from a parallel port with two devices, the STP100C and another piece of hardware. DB25 parallel male/dual female Y-splitter; 20 cm (8”).
CBL117
10 meter lightweight coaxial cable with RCA male plug to RCA male R/A plug is included with the following systems; TEL100C, VR100PHYS-W, VR100INTRO-W, VR100ADV-W, VR100ULT.
CBL118
60 meter lightweight coaxial cable wirh RCA male plug to RCA male R/A plug for TEL100C.
CBL121 This cable will connect Biodex System 4 or System 3 rev2 and above devices to a BIOPAC MP160/150 System to report Torque, Velocity, Position, and Sync
values. See Specifications document for details and safety information. See Specifications document for safety information.
CBL122
Unisolated RJ11 to 3.5 mm Jack, allows a mono 3.5 mm cable to be interfaced with the HLT100C so connections previously made through the UIM100C can  function with the MP160+HLT100C. See Specifications document for safety information.
CBL123
Unisolated RJ11 to BNC Male, 2 m cable allows equipment with BNC outputs to a connect directly to an HLT100C when no isolation is required (e.g., animal) without any additional adapters. See Specifications document for safety information.
CBL124
Unisolated RJ11to two 2 mm sockets, this Switch Adapter allows a digital switch (i.e., TSD116A or TSD116B) to be connected to an analog input of the HLT100C. When the switch is open the channel will read zero volts; when the switch is pressed/closed the channel will read 5 volts. See Specifications document for safety information.
CBL125
BNC male to BNC male, Nickel Plated, 2 m RG59 Coax cable; typically used to interface the STP100C or STP100C-C to devices that use BNC (Bayonet Neill-Concelman), such as FNIR Imager trigger ports. Typically applied for frequencies below 3 GHz; Ohm Rating: 75.

Product Documentation

Specifications
Download